Cable Routing - Invacare Pronto M41 Service Manual

Cable Routing

Cables MUST be secured to the wheelchair frame and/or base with tie-wraps after
servicing is complete. Failure to follow the warnings and instructions below could
result in injury to the users, attendants and/or bystanders and/or damage to the
wheelchair.
Cables MUST be secured so there are no loops of excess cable extending away from
the wheelchair. Bundle all excess cable together and secure with a tie-wrap. It may
also be necessary to secure these bundles to the frame and/or base.
ALWAYS TEST all wheelchair functions after securing the cables to be sure cables
DO NOT get pinched or crushed during operation of the wheelchair.
Motor
Cable
Tie Wraps
Battery Cable
Motor Cable
Tab
Part No 1145724
WARNING
Controller
FIGURE 12.5 Cable Routing
75
SECTION 12—ELECTRONICS
Joystick Connector
Tie Wrap Here
Battery Connector
Tab
Joystick Cable
NOTE: Motors not shown
for clarity. The motor
cables are routed out the
hole located at the back of
the battery box.
Pronto
®
M41