Invacare Storm4 Max Service Manual page 98

SERVICE MANUAL

Use a 5 mm Allen wrench to loosen the five hexagon socket head screws (4).

Remove the inner ring and outer ring (3) of the rim from the tire (1).

Remove the inner tube (2) from the tire.

Replace defective or worn parts, or repair these parts.
Installing a tire:

Insert the inner tube back into the tire.
NOTE
If the old tube is to be repaired and re-fitted and has become wet during repair work, powdering
the hose with some talcum powder can simplify the fitting procedure.

Re-position the rim halves (3) in the tire again. Make sure that the holes and threads for the
screws are positioned exactly on top of each other.

Inflate the inner tube with a little bit of air.

Insert the five hexagon socket head screws on the inner side of the wheel and tighten them
firmly.

Check that the tire is positioned correctly on the rim.

Inflate the tire to the prescribed pressure.

Check once more that the tire is positioned correctly on the rim.

Screw the valve cap back on.

Re-install the wheel.
98
® 4
Invacare - STORM MAX