Replacing The Front Wheel Carrier - Invacare Storm4 Max Service Manual

® 4
Invacare - STORM
7.16

Replacing the front wheel carrier

7.16.1 Replacing the front wheel carrier
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
 You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
 Switch the power supply off (ON/OFF key).
 Engage the drive.
 Before raising the vehicle, secure the wheels by blocking them with wedges.
Requirements:
 5 mm Allen key
 17 mm Allen key
 blade screwdriver
 25 Nm torque wrench
 200 Nm torque wrench
 long wooden blocks, min. 14 x 14 x 30 cm
Dismantling the front wheel carrier:

With the aid of a second person, jack up the mobility aid using several wooden blocks.

Use a screwdriver to remove the plastic cap (6).

Loosen and remove the Allen screw (2) with a 5 mm Allen key.

Loosen and remove the Allen screw (5) with a 17 mm Allen key.

Remove the two Nord-Lock lock washers (4).

Remove and replace the front wheel carrier (3).
MAX SERVICE MANUAL
91