Seat Support; Adjusting The Seat Width - Invacare Storm4 Max Service Manual

SERVICE MANUAL
7.10

Seat support

7.10.1 Adjusting the seat width

Note
The seat width can be adjusted by installing one of three different seat frames.
Requirements:
 Phillips screwdriver, size 2
 6 mm Allen wrench
 8 mm Allen wrench
Uninstalling the seat frame:

Remove the seat cushion (1).

Loosen both Phillips screws (3) and remove them.

Remove the cover plate (2).

Remove the actuator for the seat tilt, as described in chapter 7.6.6.

Remove the back part, as described in chapter 7.6.6.
78
® 4
Invacare - STORM MAX