Invacare Storm4 Max Service Manual page 103

® 4
Invacare - STORM

Remove the valve cover (2).

Press the release pin in the valve inwards and evacuate all the air from the tyre.

Undo the five 6 mm Allen screws (4) on the inside of the wheel.

Remove the inner (3) and outer (6) ring of the rim from the tyre (1).

Replace any defective or worn parts.
Refitting the tyres:

Refit the inner tube in the tyre.
Note
If the old inner tube is to be repaired and re-used, and has become wet during repair, you can
make replacement easier by sprinkling the inner tube with a little talcum powder.

Refit rim rings (3) and (6) to the tyre. Please ensure that the boreholes and thread for the
screws are exactly above each other.

Fill some air into the inner tube.

Refit the five Allen screws on the inner side of the wheel and tighten them.

Check the exact fit of the tyre on the rim.

Inflate the tyre to the prescribed air pressure.

Re-check the exact fit of the tyre on the rim.

Screw the valve cap back on.

Refit the wheel.
MAX SERVICE MANUAL
103