Installing Calf Supports - Invacare Storm4 Max Service Manual

SERVICE MANUAL
7.15

Installing calf supports

Requirements:
 5 mm Allen wrench
 T30 Torx wrench
 10 mm socket wrench

Install the calf supports as shown in the illustration above.

Attach the fixation bracket (1) of the calf support to the wheelchair using the hexagon socket
head screws (2).

The angle of the calf supports can be adjusted by loosening the screws (3). The cover (4) has
openings, so that the screws are accessible.
90
® 4
Invacare - STORM MAX