®
4
Invacare
- STORM
7.9
Replacing the safety belt
Requirements:
10 mm socket spanner
4 mm Allen key
Dismantling the safety belt:
Pull the end of the belt out of both belt guides (1).
Pull the restraining belt (2) out of the loop on the wheelchair.
Pull the complete restraining belt (2) out of both of the belt guides (1).
Remove the nut including the washer.
Replace the restraining belt (1).
Refitting the safety belt:
Refit the parts in reverse order.
Adjust the restraining belt individually to the driver by modifying the clearance of both of the
belt guides.
MAX
SERVICE MANUAL
77