Front Wheel Forks; Replacing The Wheel Fork - Invacare Storm4 Max Service Manual

® 4
Invacare - STORM
7.17

Front wheel forks

7.17.1 Replacing the wheel fork

WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
 You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
 Switch the power supply off (ON/OFF key).
 Engage the drive.
 Before raising the vehicle, secure the wheels by blocking them with wedges.
Requirements:
 19 mm socket spanner
 blade screwdriver
 long wooden blocks, min. 14 x 14 x 30 cm
Dismantling the wheel fork:

Prop up the wheelchair on multiple wooden blocks with the help of a second person.

Remove the plastic cap (1) with a screwdriver.

Use the 19 mm socket wrench to loosen and remove the nuts (2).

Pull the wheel fork (6) downwards out of the front wheel suspension (1). Pay attention to the
washers (3), spacer rings (4) and Magneto bearings (5) when doing this.
MAX SERVICE MANUAL
93