®
4
Invacare
- STORM
7.13
Installing armrests
Requirements:
4 mm Allen wrench
T30 Torx wrench
10 mm socket wrench
Rubber hammer
Install the armpad as shown in the illustration above.
Install the armrest as shown in the illustration above.
Attach the armrest along with the holder (1) to the mounting bracket (2). Utilize the screws (3)
for this purpose. By selecting different holes in the mounting bracket (1), the depth of armrest
can be adjusted.
Insert the armpad into the armrest and secure it using the screw (4).
MAX
SERVICE MANUAL
87