Paper Tray Settings - Xerox ApeosPort-II 5010 User Manual

10 System Settings
Default Language
You can select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode, and
set by ordinary users.

Paper Tray Settings

Set the items relating to the paper and trays, including the types and precedence of
paper loaded in the trays.
Custom Paper Name
Assign custom names to User 1 to User 5. The following paper types are available as the
custom paper: plain paper, bond paper, and recycled paper. You can use letters, numerals,
and symbols of up to 24 characters for each name.
For example, you can use a name showing its usage, such as "Color" for colored paper, and
"Covers" for bond paper.
For information about how to enter characters, refer to "Entering Text" (P.266).
Paper Size/Type
You can set Paper Type and Size for paper loaded in trays and Auto Paper Select.
For more information, refer to "Changing the Paper Settings" (P.250).
Paper Size
Important • Adjust the paper guides to the paper size to prevent paper jams or errors. If the machine
Paper Type
10
For the Trays 1 to 4, you can select from 18 paper types, and custom paper types 1 to 5.
For the Tray 5 (Bypass), you can select 15 paper types and custom paper types 1 to 5.
For information about paper types available on the machine, refer to "Supported Paper Type" (P.242).
Paper Tray Attributes on Setup Menu
Select whether [Paper Size/Type] is displayed in the [Setup Menu] screen or not.
Paper Tray Attributes During Loading
Select whether the [Change Settings] screen ([Paper Size/Type] screen) for the target tray is
displayed or not when pulling out or inserting the tray.
Tray 5 (Bypass) cannot be selected.
272
Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine is
powered off and on.
Setting by ordinary users
The language setting in [Language] in the [All Services] screen is lost when the machine is
powered off.
The machine automatically detects standard size paper loaded in the Trays 1 to 4. However,
when non-standard size paper is loaded, it is necessary to specify the width and height. The
size cannot be entered for the Tray 5 (Bypass).
does not detect trays, use the Tray 5 (Bypass).
Auto Size Detect
Standard size paper loaded in trays is automatically detected.
Variable Size
When setting non-standard size paper in the Trays 1 to 4, set the size in the X (width)
direction within the range 182 to 432 mm and in the Y (height) direction within the range 140
to 297 mm in 1 mm increments.