Cleaning The Document Feeder Roller - Xerox ApeosPort-II 5010 User Manual

Cleaning the Document Feeder Roller

If the machine is equipped with a document feeder and if the document feeder roller is
dirty, streaks or smears may appear on copies and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
• Cleaning the machine with an excessive amount of water may cause the machine to
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
Note • When you fully open the
2
While turning the roller, gently
clean it with a soft cloth moistened
with water.
Important • Do not use cleaning agents
• Use a cloth firmly wrung to
Note • If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small amount
3
Close the left cover of the document feeder until it clicks into place.
or coating on plastic parts.
malfunction or damage documents during copying or printing.
cover, it enters a fixed
position. Open the cover
gently.
other than water or neutral
detergent.
prevent water drops from
falling into the machine. If
water gets into the machine, it
may cause machine malfunction.
of neutral detergent.
Cleaning the Machine
14
421