Paper Jams In Trays 1 To 4; Paper Jams In The Tandem Tray Module - Xerox ApeosPort-II 5010 User Manual

Paper Jams in Trays 1 to 4

The following describes how to clear paper jams in Trays 1 and 2, and Trays 3 and 4
(optional).
Refer to "Paper Jams in the Tandem Tray Module" (P.515) for clearing paper jams in
the Tandem Tray.
1
Pull out the tray where the paper
jam occurred.
Important • Paper may torn and remain
2
Remove the jammed paper.
Note • If paper is torn, check for any
3
Push the tray in gently until it comes to a stop.

Paper Jams in the Tandem Tray Module

This section describes how to clear paper jams in the optional Tandem Tray Module.
The following explains how to remove jammed paper from the locations below.
Paper Jams in Tray 3 ................................................................................................................ 515
Paper Jams in Tray 4 ................................................................................................................ 516
Paper Jams in Tray 3
1
Pull out Tray 3.
2
Remove the jammed paper.
Note • If paper is torn, check for any
3
Push the tray in gently until it
comes to a stop.
inside the machine if you pull
out a tray without identifying
the paper jam location. This
may cause machine
malfunction. Identify where
the paper jam occurred first.
torn pieces of paper inside the
machine.
torn pieces of paper inside the
machine.
Paper Jams
15
515