Output Format
On the [Output Format] screen, you can configure features for outputting documents.
The following shows the reference section for each feature.
1
2
Select the [Output Format] tab, and
then select a feature on the [Output
Format] screen.
Copy Output (Specifying Finishing Options)
This feature allows you to select finishing options.
Note
• This feature does not appear for some models. An optional package is necessary. For more
If the offset stacking module is installed, the output position of copies is offset
alternately to separate each set of copies.
If the finisher is installed, each set of copies can be stapled and then output. If a B-
Finisher is installed, the stapling feature is available.
information, contact our Customer Support Center.
Output Format
3
79