Xerox ApeosPort-II 5010 User Manual page 82

3 Copy
1
Select [Copy Output].
2
Select any item.
Auto
According to the enabled features,
the machine automatically selects [Collated] or [Uncollated].
Copies are collated when any of the following features is used: auto document feeder,
2 Sided Book Copy, Covers, [Blank Separators & Handouts] or [Transparency Set &
Handouts] of Transparency Separators, Booklet Creation, Stapling, Build Job, Sample
Set, and Combine Original Sets.
When you do not use any of the above-described features, copies are not collated.
Collated Stapling/Punching
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
3
The machine outputs copies with inserting blank sheets as a separator and sorts
sheets by page.
Stapling
Displays the [Copy Output-Stapling] screen.
Refer to "[Copy Output] Screen" (P.80).
Hole Punching
Displays the [Copy Output-Hole Punching] screen.
Refer to "[Copy Output-Hole Punching] Screen" (P.81).
Output Destination
Select the output destination. Select from the following trays.
Note
Center Output Tray
Side Output Tray
Finisher Tray
[Copy Output] Screen
Sets the position for stapling. The number of pages that can be stapled is 2 to 50 (P
paper).
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
1
Select the stapling position.
80
• This feature does not appear for some models. An optional package is necessary. And also
the displayed items may be different, depending on the options installed. For more
information, contact our Customer Support Center.
[Layout Adjustment] screen are the same.