Xerox ApeosPort-II 5010 User Manual page 51

Setting the Initial Screen
Set the screen to be displayed after turning the machine on or exiting the Power Saver
mode. This section describes how to set the [Send from Mailbox] screen as the initial
screen, as an example.
1
Select [Screen Default], and select
[Change Settings].
2
Select [Send from Mailbox].
Note • Select [
Setting the Screen to be displayed after Auto Clear
Set the screen to be displayed after Auto Clear. You can select from [Last Selection
Screen] and [All Services].
1
Select [Screen After Auto Clear],
and select [Change Settings].
2
Select [Last Selection Screen] or
[All Services].
Customizing the [All Services] Screen
By selecting features and their positions, you can customize the [All Services] screen
that is displayed when you press the <All Services> button on the control panel.
The following are the factory default features displayed on the [All Services] screen.
Note • Unsupported features will not be displayed on the screen. Features not available due to
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Scan to PC
Send from Mailbox
Stored Programming
Language
Setup Menu
Print Mode
Fax Receiving Mode
Activity Report
] to return to the
previous screen or [ ] to
move to the next screen.
problems will be grayed out on the screen.
Control Panel
2
49