Table of Contents
Advertisement
The following table lists the paper types supported for each paper tray, duplex module,
and the finisher.
Paper Type
Plain Paper
Recycled Paper
Plain Paper (Side 2)
Transparency
Labels
Lightweight
Heavyweight 1
Heavyweight 2
*: Plain Paper (Side 2) means the paper already printed on the one side (i.e., scrap paper).
O: Available
X: Not available
Important • Printing with paper whose type or size differs from the paper specified by the print driver, or
Note
• Basic weight means a weight of 1 m
• Ream weight means weight of 1,000 sheets of paper in duodecimo size (788 x 1,091 mm).
• When copying with a non-standard size paper from the Tray 5 (Bypass), you must manually
• If B5 or smaller size paper, such as postcards, is used continuously, the non-paper passage
• When [Labels], [Heavyweight 1], or [Heavyweight 2] is selected for the paper type, load the
• Depending on the type of the heavyweight paper, paper loaded as
• Depending on the type of the paper, paper may not be fed into the machine or image quality
• If [Lightweight] is selected as the paper type, the temperature of the fuser unit automatically
• Depending on the paper type and conditions, fan the stack of paper before loading it into a
Storing and Handling Paper
Please keep the following points in mind when storing paper
Store paper inside a cabinet or other dry place. Paper that has absorbed moisture
can cause paper jams and image quality defects.
After opening a package of paper, wrap up the remaining paper to store it. It is
recommended that you include moisture prevention packets.
Weight
2
(g/m
)
60 - 105
*
-
60 - 105
-
106 - 169
170 - 216
printing from a tray not supporting the loaded paper can result in paper jams. To ensure
correct printing, select the correct paper size, paper type, and paper tray.
enter the paper size. If you use non-standard size paper often, you can preset the size on
the machine. Then the preset size appears under [Standard Sizes] in the [Tray 5 (Bypass)]
screen. For more information, refer to "Tray 5 (Bypass) - Paper Size Defaults" (P.273).
side on the fuser unit heats up. For this reason, the message "Please wait" is sometimes
displayed and output is discontinued. Printing resumes after one to two minutes. The
message "Please wait" is also sometimes displayed and printing is discontinued for 30
seconds or more when one sheet of paper A5 in size or smaller has been printed.
paper as
. If the paper is loaded as
the machine. If it happens, load the paper as
may deteriorate. In such cases, select [Heavyweight 1] or [Heavyweight 2].
decreases. When the paper is curled or problems occur due to the high temperature of the
fuser unit, select [Lightweight].
paper tray.
Tray 2,3,4
(Two Tray
Module/
Tray 5
Tray 1
Tandem
(Bypass)
Tray
Module)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
X
O
O
2
of a paper sheet.
, image quality may deteriorate.
.
Paper Types
Duplex
B-Finisher
Module
O
O
O
O
X
O
X
X
X
X
X
X
X
X
X
X
may not be fed into
9
243
- Quick Links:
- Error Code
Hide quick links:
Advertisement
Table of Contents
