Delete Startup-Config; Dir - Cisco 220 Series Smart Plus Reference Manual

Configuration and Image File Commands

delete startup-config

delete startup-config

dir

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To delete the Startup Configuration from the flash memory, use the delete startup-
config Privileged EXEC mode command. The system will start with the default
configuration during the next startup.
Syntax
delete startup-config
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example deletes the Startup Configuration file from the flash
memory:
switchxxxxxx# delete startup-config
Delete startup-config [y/n]
To show information for the files in the flash memory, use the dir Privileged EXEC
command.
Syntax
dir
Parameters
N/A
9
136