Chapter 41: Vlan Commands; Name (Vlan) - Cisco 220 Series Smart Plus Reference Manual

VLAN Commands

name (vlan)

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set the name for a VLAN, use the name VLAN Configuration mode command.
To remove the name for a VLAN, use the no form of this command.
Syntax
string
name
no name
Parameters
string
• —Specifies a unique name associated with this VLAN. (Length: 1 to 32
characters)
Default Configuration
N/A
Command Mode
VLAN Configuration mode. It cannot be configured for a range of VLANs.
User Guidelines
The VLAN name must be unique.
Example
switchxxxxxx(config)# vlan 19
switchxxxxxx(config-if)# name Marketing
41
501