Table of Contents
Advertisement
STP Commands
show spanning-tree mst configuration
show spanning-tree mst configuration
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Instance Status : Disabled
Bridge Identifier : 32768/ 0/00:03:6D:00:10:00
------------------------------------------------------------
Regional Root Bridge : 32768/ 0/00:03:6D:00:10:00
Internal Root Path Cost : 0
Remaining Hops : 20
Topology changes : 4
Last Topology Change : 0
------------------------------------------------------------
VLANs mapped: 1-4094
============================================================
Interface
Role Sts Cost
---------------- ---- --- --------- -------- --------------------------------
gi1
Desg FWD 200000
To show the MSTP instance configuration, use the show spanning-tree mst
configuration Privileged EXEC mode command.
Syntax
show spanning-tree mst configuration
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show spanning-tree mst configuration
Name
[00:03:6D:00:10:A0]
Revision
0
Instances configured 2
Instance
Vlans mapped
--------
-----------------------------------------------------------------
0
1,5-4094
1
2-4
---------------------------------------------------------------------------
Prio.Nbr Type
128.1
P2P (STP)
33
422
Advertisement
Table of Contents
