Table of Contents
Advertisement
802.1X Commands
show dot1x interfaces
show dot1x interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Field
Guest VLAN
In Guest VLAN
To show 802.1X configuration on specific interfaces, use the show dot1x
interfaces Privileged EXEC mode command.
Syntax
show dot1x interfaces {
Parameters
interface-id
•
—An interface ID or a list of interfaces.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show dot1x interfaces gi11
Port
|
Mode
eriod
--------+--------------------+----------------------+-----------------+-----
---------
gi11
|
Authentication |
5000
Quiet Period:
Supplicant timeout:
Max req:
Session Time (HH:MM:SS): 0: 0: 0: 0
Description
Shows whether 802.1X authentication is enabled or
disabled on the port.
Shows whether the unauthorized port is in or not in the
guest VLAN.
interface-id
}
|
Current State
Initialize
60 Second
30 Second
2
|
Reauth Control | Reauth P
|
Enabled
2
|
48
Advertisement
Table of Contents
