Management ACL Commands
show management access-class
show management access-class
show management access-list
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# management access-list mlist
switchxxxxxx(config-macl)# permit ip 192.168.1.111/0.0.255.255 interfaces
gi11 service http
switchxxxxxx(config-macl)# exit
To show information about the active management ACL, use the show
management access-class Privileged EXEC mode command.
Syntax
show management access-class
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show management access-class
Management access-class is enabled, using access list mlist
To show information for all management ACLs or for a specific management ACL,
use the show management access-list Privileged EXEC mode command.
Syntax
show management access-list [
Parameters
name
•
—(Optional) The name of a management ACL to be displayed.
Default Configuration
N/A
name
]
23
351