Ipv6 Mld Snooping Vlan Forbidden Forward-All - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

ipv6 mld snooping vlan forbidden forward-all

ipv6 mld snooping vlan forbidden forward-all
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
User Guidelines
A port that is a forbidden-mrouter-port cannot be a multicast router port (for
example, cannot be learned dynamically or assigned statically).
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ipv6 mld snooping vlan 1 forbidden mrouter interfaces
gi1
To enable the MLD snooping forbidden forward-all processing on the VLANs, use
the ipv6 mld snooping vlan forbidden-port Global Configuration mode command.
To disable this feature, use the no form of this command.
Syntax
ip6 mld snooping vlan
no ip6 mld snooping vlan
Parameters
VLAN-LIST
• —A VLAN ID or a range of VLAN IDs.
interface-id—
• interfaces
The interfaces can be one of these types: Ethernet port or port channel.
Default Configuration
No port is configured as a member of a multicast group.
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
You can register an entry without specifying an interface.
VLAN-LIST
forbidden forward-all interfaces
VLAN-LIST
forbidden forward-all interfaces
Specifies an interface ID or a list of interface IDs.
19
interface-id
interface-id
284