Clear Etherlike Statistics; Default Interface - Cisco 220 Series Smart Plus Reference Manual

Ethernet Configuration Commands

clear etherlike statistics

clear etherlike statistics

default interface

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To clear the Etherlike statistics counters on all interfaces, use the clear etherlike
statistics Privileged EXEC Mode command.
Syntax
clear etherlike statistics
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# clear etherlike statistics
To restore an interface to its default settings, use the default interface Interface
Configuration mode command.
Syntax
interface-id
default interface
Parameters
interface-id
• —The Ethernet interface ID.
Default Configuration
N/A
Command Mode
Interface Configuration mode
11
156