Table of Contents
Advertisement
IGMP Snooping Commands
show ip igmp snooping groups
show ip igmp snooping groups
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To display multicast groups learned by IGMP Snooping, use the show ip igmp
snooping groups Privileged EXEC mode command.
Syntax
show ip igmp snooping groups [counters | dynamic | static]
Parameters
•
counters—(Optional) Displays IPv4 group total entries.
•
dynamic—(Optional) Displays dynamic groups.
•
static—(Optional) Displays static groups.
Command Mode
Privileged EXEC mode
User Guidelines
To display all multicast groups learned by IGMP Snooping, use the show ip igmp
snooping groups command without parameters.
To display a needed subset of all multicast groups learned by IGMP Snooping, use
the show ip igmp snooping groups command with parameters.
Example
switchxxxxxx# show ip igmp snooping groups
VLAN | Gourp IP Address |
-----+------------------+-------+-----------+------------------
1 |
238.0.0.0
Total Number of Entry = 1
Type
| Life(Sec) | Port
|
Static|
--
13
| fa1-24,gi1-2,po1-8
222
Advertisement
Table of Contents
