Table of Contents
Advertisement
LLDP Commands
show lldp interfaces
show lldp interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the LLDP configuration for specific interfaces, use the show lldp
interfaces Privileged EXEC mode command.
Syntax
show lldp interfaces
Parameters
•
interface-id
—An interface ID or a list of interface IDs.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show lldp interfaces gi11
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
LLDP packet handling: Flooding
Port
|
State | Optional TLVs
-------- + ------ + -------------- + --------
gi11 |
RX,TX |
Port ID: gi11
802.3 optional TLVs:
802.1 optional TLVs
PVID: Enabled
interface-id
| Address
SN, SC |192.168.1.254
22
337
Advertisement
Table of Contents
