Ip Igmp Snooping - Cisco 220 Series Smart Plus Reference Manual

IGMP Snooping Commands

ip igmp snooping

ip igmp snooping
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
switchxxxxxx(config)# ip igmp profile 20
switchxxxxxx(config-igmp-profile)#
To enable IGMP Snooping on the switch, use the ip igmp snooping Global
Configuration mode command.
To disable IGMP Snooping on the switch, use the no form of this command.
Syntax
ip igmp snooping
no ip igmp snooping
Parameters
N/A
Default Configuration
IGMP Snooping is enabled by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# ip igmp snooping
13
200