Table of Contents
Advertisement
802.1X Commands
show dot1x authenticated-hosts
show dot1x authenticated-hosts
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
The following table describes the significant fields shown in the example:
Field
802.1x protocol is
802.1x protocol
version
To show information for all dot1x authenticated hosts, use the show dot1x
authenticated-hosts Privileged EXEC mode command.
Syntax
show dot1x authenticated-hosts
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Examples
switchxxxxxx# show dot1x authenticated-hosts
User Name
|
Port
Address
------------+-------+-------------------+-----------------------+-----------
The following table describes the significant fields shown in the example:
Field
User Name
Description
Port-based 802.1X authentication is enabled or
disabled on the switch.
Version of the 802.1X protocol.
|
Session Time
Description
Supplicant name that was authenticated on the port.
|
Authentication Method | MAC
2
45
Advertisement
Table of Contents
