Wizards
Using the Startup Wizard
STEP 1
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
This chapter describes how to use the wizards to configure your security
appliance.
•
Using the Startup Wizard, page 32
•
Using the Wireless Wizard to Configure the Wireless Settings for
ISA550W and ISA570W, page 40
•
Using the DMZ Wizard to Configure the DMZ Settings, page 46
•
Using the Dual WAN Wizard to Configure the WAN Redundancy
Settings, page 51
•
Using the Site-to-Site Wizard to Establish the Site-to-Site VPN Tunnels,
page 53
•
Using the Remote Access Wizard to Establish the IPSec VPN Tunnels or
SSL VPN Tunnels for Remote Access, page 58
To access the Wizards pages, click Wizards in the left hand navigation pane.
The Startup Wizard helps you configure the remote management, port, WAN, LAN,
DMZ, and WLAN (for ISA550W and ISA570W only) settings. The first time you log
into your security appliance, the Startup Wizard automatically launches.
Click Wizard -> Startup Wizard.
The Getting Started window opens. A prompt warning message is displayed as
below.
2
32