Industrial 2 Of 5 Set Length 2 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Industrial 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
the maximum label length if in
Length
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 13. Industrial 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
Product Reference Guide
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The
13
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Industrial 2 of 5 Length
Variable Length Mode, or the second fixed length if in
page 243
EXAMPLES
07 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Industrial 2 of 5 Set Length 2
Control. Length 2 is
for detailed instructions on
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed
157