Configuration Using Barcodes; Configuration Parameters - Wasp WLS9600 Product Reference Manual

This and following sections provide programming barcodes to configure your reader by
changing the default settings. For details about additional methods of programming, see
Configuration Methods on page

Configuration Parameters

Once the reader is set up, you can change the default parameters to meet your application needs.
Refer to
default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to find
the desired function based on its reference group.
Interface Configuration:
• "RS-232 ONLY Interface" on page 19
• "RS-232/USB-Com Interfaces" on page 24
• "Keyboard Interface" on page 33
• "USB-OEM Interface" on page 45
• "Wand Emulation Interface" on page 47
Parameters common to all interface applications:
"Data Format" on page 51
•
"Reading Parameters" on page 65
•
functioning.
Symbology-specific parameters:
• "Code Selection" on page 77
families and their options.
Model-specific parameters:
• "Laser Features" on page 227
Product Reference Guide

Configuration Using Barcodes

3.
You must first enable your reader to read barcodes in order to use this
section. If you have not done this, go to
complete the appropriate procedure.
"Standard Defaults" starting on page 265
gives options to control the messages sent to the Host system.
provides configuration of a personalized mix of codes, code
for initial configuration in order to set the
control various operating modes and indicators status
provides options specific to laser models.
Chapter 3
Setup, starting on page 5
and
15