Codablock F Set Length 2 - Wasp WLS9600 Product Reference Manual

Codablock F

Codablock F Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
Table
this feature.
Table 7. CODABLOCK F Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Three Characters From
4
Appendix D, Keypad
5
Select Codablock F Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
138
Variable Length
7
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABLOCK F LENGTH 2 SETTING
'0' , '0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Codablock F Length
Mode, or the second fixed length if in
page 243
EXAMPLES
07 Characters 15 Characters
'0' , '0' and '7'
100 = Length 2 is 100 Characters
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
50 Characters
'0' , ' 1' and '5' '0' , ' 5' AND '0'
CANCEL
WLS9600