Standard 2 Of 5 Set Length 1 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Standard 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
the minimum label length if in
Mode. Length includes the barcode's check and data characters. The length can be set from 1 to
50 characters.
Table
instructions on setting this feature.
Table 10. Standard 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
10
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Standard 2 of 5 Length
Variable Length Mode, or the first fixed length if in
EXAMPLES
07 Characters
'0' and '7'
08 = Length 1 is 8 Characters
Standard 2 of 5 Set Length 1
Control. Length 1 is
Fixed Length
page 242
if you want detailed
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
151