QSG
Factory Default
Use the Factory Default barcode to reset the scanner to the Default settings.
Check Version
Scan the Check Version barcode to verify your current firmware's version number.
Link Quality On/Off
Link Quality affects the transmission quality. When Link Quality is turned
on (default setting), data transfer is more secure, but slower. If you notice
that your transmissions to the host are too slow, you can try turning the
Link Quality setting to off.
Link Quality On*
Set Connection
Scan this barcode to break your current connection and enable your device
to connect to a new Bluetooth host.
Factory Default
Check Version
Set Connection
4
Link Quality Off