Plessey Set Length 2 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Plessey Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 27. Plessey Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
Product Reference Guide
Variable Length
27
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT PLESSEY LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Plessey Length
Mode, or the second fixed length if in
page 243
EXAMPLES
07 Characters 15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Plessey Set Length 2
Control. Length 2 is the
Fixed Length
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
217