Code 93 Set Length 1 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 93 Set Length 1

Specifies one of the barcode lengths for
length if in
includes the barcode's data characters only. The length can be set from 01 to 50 characters.
Table
setting this feature.
Table 22. Code 93 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
Product Reference Guide
Variable Length Mode, or the first fixed length if in
22
provides some examples for setting Length 1. See
01 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 93 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 93 Length Control. Length 1 is the minimum label
page 242
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
01 = Length 1 is 1 Character
Code 93 Set Length 1
Fixed Length Mode. Length
for detailed instructions on
50 Characters
'5' AND '0'
CANCEL
201