Set Date And Time - Wasp WWS750 Quick Reference Manual

Set Date and Time

1. Scan the Enter/Exit Programming barcode
below to set date and time.
2. Scan the Set Date barcode + six digits for Year,
Month and Day (YYMMDD) from the
Numeric Keypad on page
3. Scan Set Time + six digits for Hours, Minutes and
Seconds (HHMMSS) from the
pad on page
4. Scan the Enter/Exit Programming barcode to
complete.
Quick Reference Guide
Reset Default Settings
ENTER/EXIT PROGRAMMING MODE
Set Date
36.
Set Time
Set Date and Time
Hex-
36.
Hex-Numeric Key-
9