Disable All Symbologies - Wasp WLS9600 Product Reference Manual

Disable All Symbologies

3. If additional input parameters are needed, go to
4. Complete the programming sequence by scanning the ENTER/EXIT PROGRAM-
Use this feature to disable all symbologies.
1. Scan the ENTER/EXIT PROGRAMMING barcode below.
2. Scan the Disable All Symbologies barcode.
3. Complete the programming sequence by scanning the ENTER/EXIT PROGRAM-
78
priate characters from the keypad.
Additional information about many features can be found in the "Refer-
ences" chapter.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the begin-
ning.
MING barcode to exit Programming Mode.
DISABLE ALL SYMBOLOGIES
MING barcode.
This does not disable the reading of programming labels.
Appendix D,
ENTER/EXIT PROGRAMMING MODE
Disable All Symbologies
Keypad, and scan the appro-
WLS9600