Code 11 Set Length 1 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 11 Set Length 1

This feature specifies one of the barcode lengths for
minimum label length if in
Mode. Length includes the barcode's check and data characters. The length can be set from 2 to
50 characters.
Table
setting this feature.
Table 18. Code 11 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Variable Length
18
provides some examples for setting Length 1. See
02 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 11 LENGTH 1 SETTING
'0' and '2'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 11 Length
Mode, or the first fixed length if in
page 242
EXAMPLES
07 Characters 15 Characters
'0' and '7'
04 = Length 1 is 4 Characters
Code 11 Set Length 1
Control. Length 1 is the
Fixed Length
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
185