China Postal Code Set Length 1 - Wasp WLS9600 Product Reference Manual

China Postal Code

China Postal Code Set Length 1

This feature specifies one of the barcode lengths for
the minimum label length if in
Mode. The length includes the barcode's check and data characters. The length can be set from
2 to 50 characters in increments of two.
Table
setting this feature.
Table 14. China Postal Code Length 1 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
Select China Postal Code Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
164
14
provides some examples for setting Length 1. See
2 Characters
02
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT China Postal Code LENGTH 1 SETTING
'0' and '2'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
China Postal Code Length
Variable Length Mode, or the first fixed length if in
EXAMPLES
6 Characters
06
'0' and '6'
06 = Length 1 is 6 Characters
Control. Length 1 is
Fixed Length
page 242
for detailed instructions on
14 Characters 50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL
WLS9600