I 2 Of 5 Set Length 2 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

I 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. The length includes the barcode's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
this feature.
Table 9. I 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Variable Length
9
provides examples for setting Length 2. See
Ignore This
Length
00
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT I 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
I 2 of 5 Length
Mode, or the second fixed length if in
page 243
EXAMPLES
4 Characters 14 Characters
04
'0' and '4'
50 = Length 2 is 50 Characters
I 2 of 5 Set Length 2
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL
145