French Pharmacode Parameters; Industrial 25 Parameters; Interleave 25 Parameters - Wasp WWS800 Reference Manual

French Pharmacode Parameters

• Checksum Transmission
< Enable >

Industrial 25 Parameters

• Start / Stop Selection
< Industrial 25 >
Matrix 25
• Checksum Verification
Enable
• Checksum Transmission
< Enable >
Disable
Interleave 25
< Disable >
Disable
Update
• Max / Min Code Length Qualification
• Fixed Code Length Qualification
Programming Instructions : (1) Read the label. (2) Program the desired length by
reading Decimal Digits on page 49. (3) Read the "Validate" label (also on page 49)
to complete this setting.

Interleave 25 Parameters

• Start / Stop Selection
23 24
Select Max / Min Length Qualification
Max Length *
Select Fixed Length Qualification
Fixed Length 1 *
Industrial 25
Matrix 25
Enter Setup
Min Length *
Fixed Length 2 *
< Interleave 25 >