Using The Touch Finder As A Portable Device (With Battery) - Omron FQ2-S4 User Manual

2
Press the slider up on the Touch Finder.
3
Create holes in the panel for mounting.
Refer to the following page for hole dimensions.
p. 560
4
Connect the cable to the Touch Finder.
5
Mount the Touch Finder with the Panel Mount Adapter from
the front of the panel.
6
Hook the hooks on the Mounting Bracket in the four holes
of the Panel Mount Adapter and secure them with screws.
(Tightening torque: 1.2 N·m)
7
Check that the Touch Finder is attached properly to the
Panel.

Using the Touch Finder as a Portable Device (with Battery)

The Touch Finder with a Battery can be used as a portable device. Use the strap when carrying it to prevent
dropping it.
There are two types of straps (FQ-XH, sold separately), a Neck Strap and a Hand Strap.
Neck Strap
1
Attach the Mini-strap to the Touch Finder.
There are a total of four holes for attaching the Mini-strap on the left and on the right of the Touch Finder.
40
Installation
Hand Strap
Mounting
Bracket
FQ2-S4 User's Manual