Device User Id; Event Control; The Way To Use Event; Event Function - Omron STC-LBS34U3V-SWIR Product Specifications And User's Manual

9.16

Device User ID

DeviceUserID provides user access to writable memory area.
Up to 64 bytes data can be stored (The data still remains, even camera power is off)
When the data is less than 64 bytes, please add 0x00 at end of data.
9.17

Event Control

The camera can be send notification of event inside of camera to host controller.
GenICamParameters
EventSelector
EventNotification
Please select the available event at "EventSelector" then select "On" at "EventNotification" then event function is
enabled.
The event functions on camera are as follows.
1) EventExposureStart
Send notification as event when expose starts in camera.
EventID is 0x9002.
2) EventExposureEnd
Send notification as event when expose finishes in camera.
EventID is 0x9001.
(*) The event occurrence frequently, stream data transferring rate could be reduced because Event and Stream
(image data) share USB bus.
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
IEnumeration Type Select Event Function
IEnumeration Type Switch ON / OFF for Event function that was selected at "EventSelector".
On: Event function On, Off: Event function Off
No. 22S036-00
44/54