Table of Contents
Advertisement
Menu command
Output period
GATE ON delay
Output time
Timeout
Number of delay Set the number of times to ignore the
ACK signal ON
period
Output polarity
Input mode
476
Menu Tables
Description
Sets the period for outputting measure-
ment results. (Only when the FQ-SDU1@
is connected.)
Sets the time from when the result is out-
put to the parallel interface until the
GATE signal turns ON.
(Only when the FQ-SDU1@ is con-
nected.)
Sets the time to turn ON the GATE sig-
nal.
(Only when the FQ-SDU1@ is con-
nected.)
Sets the timeout time for output control.
(Only when the FQ-SDU1@ is con-
nected.)
TRIG signal turning ON between when
the TRIG signal turns ON and the mea-
surement results are output.
(Only when the FQ-SDU1@ is con-
nected.)
Sets the output time of the normal execu-
tion completion signal for parallel com-
mands.
(Only when the FQ-SDU is connected.)
Sets the ON/OFF polarity for all of the
output signals
(Only when the FQ-SDU is connected.)
Specifies whether to use functions other
than scene switching for external parallel
commands.
Setting range
2.0 to 5,000.0 ms
10.0 ms (default)
1.0 to 1,000.0 ms
1.0 ms (default)
1.0 to 1,000.0 ms
5.0 ms (default)
0.5 to 120.0 s
10.0 s (default)
1 to 15 (default)
1.0 to 1,000.0 ms
5.0 ms (default)
Positive(default), Negative
Standard mode (default) or Expanded
mode
Data
Refer-
ence
System
p. 309
System
p. 309
System
p. 309
System
p. 309
System
p. 309
System
p. 316
System
p. 316
System
p. 293
FQ2-S4 User's Manual
Advertisement
Table of Contents
Troubleshooting
