Changing The Label Detection Conditions - Omron FQ2-S4 User Manual

Changing the Label Detection Conditions

You can fill in the labels detected through color extraction or binary conversion to perform a stable extraction of
the labels and their characteristics or to mark only labels inside the measurement region for inspection.
− [Inspection] −
[Inspect]
1
To enable filling up holes, press [Filling up holes]
and select [Yes].
2
To extract an image, press [Extract image] and select
[Yes].
Parameter
Filling up holes
Extract image
192
Inspecting with the Labeling Inspection Item
−
[Labeling] [Modify]
Setting Description
Yes Sets how to process areas surrounded by the specified color. If [Yes]
No (default) is set, those areas are processed as the specified color.
Input Image
Yes Select this option if there are areas of the specified color inside the
No (default) measurement region that you do not want to measure. If [Yes] is set,
all areas outside the measurement region are cut out as the specified
color.
You need to know the
position and area of
this label.
−
[Details] Tab Page
Filled Image
Measurement region
Yes
You can find the position
and area of the center label
if you set the sort condition
to sort by descending order
of area. Areas outside the
measurement region are set
to the color for measure-
ment.
−
[Meas. Parameter]
FQ2-S4 User's Manual