Calculations And Judgements Using Inspection Item Data; Calculation - Omron FQ2-S4 User Manual

Smart camera

Hide thumbs Also See for FQ2-S4:

Table of Contents

4-17 Calculations and Judgements Using Inspection Item Data

You can set inspection item judgement results and measurement data with the Calculation menu command to

use them in basic arithmetic operations and functions. The judgement results of the calculations are reflected

in the overall judgement.

Use the Calculation menu command to set the calculation expressions and the judgement parameters for the

calculation results.

You can get up to 32 expressions. You can also combine expressions.

You can use the following values in calculations.

• Filter item and position compensation item data (measurement data, reference values, and judgement

• Inspection item data (measurement data, reference values, and judgement results)

• Other calculation results

Upper and lower limit values are used for the judgement of calculation results (D0 to D31). Each calculation

judgement result (J0 to J31) is turned ON if the result falls within the upper and lower limits. The OR logic of

these results will be the overall judgement result JG.

You can reflect the judgement results (JG) of the calculations in the overall judgement. (You can also set the

output parameters so that the judgement results are not reflected in the overall judgement.)

FQ2-S4 User's Manual