Omron FQ2-S4 User Manual page 222

Note
You can select one of the following three patterns as the judgement method.
− [Select the method.] on the right side of the display
[ ]
1) Threshold (minimum): The lower limit of the variations between OK object is used as the judgement
condition.
2) Threshold (average): The median value between the OK object variations and NG object variations is
used as the judgement condition.
3) Threshold (maximum): The upper limit of the variations between NG object is used as the judgement
condition.
Number of
registered
samples
Important
There are no judgement condition settings for the following inspection items.
Bar code and 2D-code
220
Adjusting the Judgement Parameters
Press [NG Teach] to register.
3)
Press [OK Teach] to register.
2) 1)
Measurement
value
FQ2-S4 User's Manual