Port-Based Network Access Control Commands; Show Mac-Address-Table Gmrp; Clear Dot1X Statistics - NETGEAR M4100 Series ProSAFE Reference Manual

Term Definition
LeaveAll Timer This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. There is an instance of this timer on a per-Port,
per-GARP participant basis. The Leave All Period Timer is set to a random value in the
range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200–6000
centiseconds (2–60 seconds). The factory default is 1000 centiseconds (10 seconds).
Port GMRP The GMRP administrative mode for the port. It may be enabled or disabled. If this
Mode parameter is disabled, Join Time, Leave Time, and Leave All Time have no effect.

show mac-address-table gmrp

This command displays the GMRP entries in the Multicast Forwarding Database (MFDB)
table.
Format
show mac-address-table gmrp
Mode Privileged EXEC
Term Definition
Mac Address A unicast MAC address for which the switch has forwarding and or filtering information.
The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for
example 01:23:45:67:89:AB. In an IVL system the MAC address is displayed as 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

Port-Based Network Access Control Commands

This section describes the commands you use to configure port-based network access
control (802.1x). Port-based network access control allows you to permit access to network
services only to and devices that are authorized and authenticated.

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.
Format
clear dot1x statistics {<slot/port> | all}
Mode Privileged EXEC
M4100 Series ProSAFE Managed Switches
Switching Commands
80