Connecting To A Host Computer, Printer Or Modem - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide

Connecting to a Host Computer, Printer or Modem

1. Plug an RS-232 serial cable into the RS-232 port located on the back of cradle.
2. Connect the other end of the cable to the serial (COM) port of the host computer
or printer.
Note: In most cases, you must use a null-modem cable. However,
modems and some serial printers (DCE-type) require a DB9 or
DB25 connection. For a DB25 connection, use cable p/n 25-19297-
01. For a DB9 connection, use cable p/n 25-19299-01 (see your
System Administrator).
3-4
Figure 3-2. RS-232 Communication Port
RS-232 Port