Symbol PDT 7200 Series Product Reference Manual page 46

Operating the Terminal
Table 4-1. PDT 7200 Wakeup Sources (Continued)
Source Manual Default Timeout Default
(power switch)
COM ring (1) disabled disabled
* Not supported at this time. Inserting a battery does NOT wake up the terminal.
† For these devices to cause a wakeup, they must be "rearmed" if they were enabled when
the terminal was suspended and the battery unlatched without an external power source
being connected. Wakeup sources do not function once the battery is re-installed until the
terminal is suspended and resumed again.
‡
Some cards are designed to wake up the terminal (e.g., radio or modem cards). Be sure to
use wakeup ONLY on cards that are designed for it and that you want to wake up.
4-5